squish

英 [skwɪʃ]

美 [skwɪʃ]

v.  (被)压坏，挤坏; 发吧唧声; 发吱嘎声

过去分词：squished　过去式：squished　现在分词：squishing　第三人称单数：squishes　

BNC.48495 / COCA.19433

牛津词典

verb

• （被）压坏，挤坏
  if sth soft squishes or is squished , it is crushed out of shape when it is pressed
• 发吧唧声；发吱嘎声
  to make a soft wet sucking sound

英英释义

noun

• the noise of soft mud being walked on

verb

• put (a liquid) into a container or another place by means of a squirting action
• walk through mud or mire
  1. We had to splosh across the wet meadow
  Synonym:squelchsplashsploshsloshslop

双语例句

• The squish patterns in engine piston bowls with different geometry are visualized by the method of oil streak in a motored single cylinder test engine.
  本文在一个拖动的单缸实验机上，利用油点条痕法显示了活塞上燃烧室凹坑中挤流运动的流谱，研究了燃烧室形状和几何尺寸对挤流谱的影响。
• As he walked along the path through the field, he could hear the squish of the damp ground beneath his boots.
  当他走在穿过田野的小径上时，他能听见靴子底下潮湿的土地发出的嘎吱声。
• The reversed squish is mainly concentrated at the edge of the combustion chamber.
  逆挤流主要发生在燃烧室边缘；
• It shows that the squish flow velocity decreases and the reverse flow velocity increases as cylinder heat transfer and cylinder gas leakage increase.
  本文还导出了考虑散热和活塞环漏气影响的轴向挤流速度和逆喷速度的解析关系式，该式表明散热和活塞环漏气使轴向挤流速度减小，逆喷速度增加。
• Squish the ellipse to about half the size.
  挤椭圆约一半大小。
• The air motion in UCS combustion system is much stronger than that in base combustion system and the strong reversed squish lasts longer in the former than in the latter because the former has a far larger squish area than the latter.
  伞帘喷雾燃烧系统的挤气面积远大于原机，因此前者的空气运动明显强于后者，较强逆挤流维持的时间长于后者。
• And, then we squish all of them up, and that's how we get the contour plot OK, so each of these lines, imagine that this is like some mountain or something that you are hiking on.
  然后把所有等高线聚合到一起，这样就得到了等高线图，对于每一条这些线，想象，你是在爬山或是徒步旅行。
• As the small and medium sized high-speed direct injection diesel engine needs strong intake swirl, squish compression and combustion turbulence, its intake port generally made spiral or tangential shape.
  对于中小型高速直喷式柴油机，因其需要较强的进气涡流、压缩挤流和燃烧紊流，其进气道一般做成螺旋的或切向的形状。
• The reflected spray distributes at squish zone and concave zone of combustion chamber, big swirl of spray is obtained and expand to more domains.
  反射后的油束分布在燃烧室的挤流区和凹坑区，形成大的油束涡流，并向较大范围扩展。
• Experimental Research on a Squish Jet Combustion Chamber
  CA1102汽油机挤气射流燃烧室研究